MEN’S HAIRCUT DEFINITIONS
The first step in knowing how to get a men’s haircut is knowing the right haircut names and different Men’s Haircut Definitions. This article gives you the terms for most common men’s haircuts and haircutting terms which will help you better communicate with your barber or stylist and, hopefully, get a better men’s haircut.
MEN’S HAIRCUT DEFINITIONS
Once, when I was just starting out, I had a guy sit down in my chair and say, “give me a high and tight.” He had long hair, so I asked, “are you sure you want a high and tight?” He said, “yes.” So, I snapped a 00000 blade onto my clipper and ran it completely up the side of his head, shearing off about two inches of hair in the process. At the sight of the bald stripe I had cut out of his hair, he jumped up, and yelled, “Holy shit! Man, are you crazy?” I wasn’t crazy, he just didn’t know what a high and tight was. I did finish the haircut and it looked great on him. He still wears a high and tight to this day. Had he known the common men’s haircut definitions, things might have turned out very differently.
“ I know what haircut I want but I don’t know how to articulate it to a barber shop near me”. This is a common issue. Knowing the right terminology is important to communicate with your barber. Below are common men’s haircut definitions:
The space above the ear is outlined with clippers. Many barbers will cut a higher arch into the hairline which will not look good as the cut grows out. The arch should simply enhance the natural hairline. If you prefer a natural arch (one that is not cleanly outlined), you should specify this to your barber.
A “style” in which all of the hair on the scalp is removed with a razor. This is a popular cut among athletes and men who are naturally balding.
The section of hair that falls over the forehead. Can be worn combed down over the forehead, brushed to the side, or brushed back.
Blocking is when a visible line is created with the clippers at the nape. This is the most common type of finishing at the neck, but not always the most desirable. The disadvantage of a blocked hairline is that it does not grow out neatly and can make a thick neck look too wide.
This haircut was common in the depression era because it was an easy men’s haircut to do at home. A bowl was placed on the head and all of the hair below was removed. This cut (which is also commonly called an “undercut”) is popular among young teens and children.
The sides and back are cut as for a crewcut. The top is cut the same length, about one-quarter to one-half inch over the top, following the contour of the head. The hair is then combed up so that the top resembles the bristles of a brush.
Hair over the entire head is cut one length, usually 1/8″ or shorter. This is the type of haircut that new military recruits receive upon entering the service. This is a good option for someone who wants a no-maintenance haircut.
BUSINESS MAN’S HAIRCUT
Most popular among working professionals who require a conservative look. Normally, hair is cut with a slight taper on the sides and back and the top is left long enough to part and comb to the side.
This is a short version of the basic crewcut. Hair is left no longer than 1/4″ on top and neatly tapered around the ears and at the back of the head.
A general term used to refer to haircuts that are done entirely with clippers. Technically speaking, there is no “official” style that can be called a buzzcut. See the following: butch, burr, brush cut, and crew cut.
A semi-short hairstyle made popular by Julius Caesar. The hair is layered to 1″ to 3″ on top and brushed forward with short bangs at the front. This cut is a low-maintenance style and is ideal for covering a receding hairline.
Commonly referred to as a short businessman’s cut or graduation. The hair is left long enough to comb on top and gradually tapers down to 1/8 inch around the ears and the neck. This is a very traditional men’s cut that is appropriate for any lifestyle.
Also known as short pomp or brush cut. The hair is cut short on the sides and back with the hair on top graduated in length from the front of the hairline to the back of the crown. The top hair, from side to side, should form a slight curve to conform to the general contour of the head.
The term “fade” originated in ethnic shops and has now become the popular term for an aggressively tight taper. Hair at the sides and back are cut as close as possible with clippers and “fades” or tapers up into almost any length on top. In some cases, this haircut is mistakenly called a “military reg,” which is misleading because each branch of the service has different regulations regarding hair length.
FADE – LOW SKIN FADE
This is a vacation of the fade in which the hair is shaved below the midpoint between the top of the ear and the round of the head and fades evenly into the length on top.
FADE – MEDIUM SKIN FADE
This is a vacation of the fade in which the hair is shaved to the midpoint between the top of the ear and the round of the head and fades evenly into the length on top.
FADE – HIGH SKIN FADE
This is a vacation of the fade-in in which the hair is shaved above the midpoint between the top of the ear and the round of the head and fades evenly into the length on top.
This is a basic high tapered haircut in which the hair is styled into a point at the center. It resembles a Mohawk, but without the shaved sides with a hard line at the top. The style can be worn as a Faux Hawk or styled differently for a conservative look.
The sides and back are cut similar to a crewcut, with the following exceptions: The hair is cut on top with emphasis on flatness. The hair at the sides of the top is cut to give a square appearance. The photo to the left is a short flattop with rounded corners. Variations include: “Flattop with Fenders,” in which the hair on the sides is left longer and brushed back, giving the hair on the sides the appearance of fenders over the wheel of a car; also the “Horseshoe,” which is an extremely short flattop with a “landing strip” in the middle. Viewed from the top, the hair resembles a horseshoe.
This is a term used to describe when a part is shaved into the hair with a trimmer or straight razor. A hard part requires frequent maintenance as the short hairs in the part line grow out quickly and will stand up straight on most men.
HIGH & TIGHT
A very common haircut among US Marines, Army Rangers, and athletes. The hair is cut “high and tight” on the sides and back (zero-length up to the crown). The top is usually crewcut length and may be blended with the sides or left with a distinct line between the shaved sides and the longer top. The sides and back of the head are commonly shaved with a straight razor.
In recent years, many men have embraced the use of color to give their style a unique signature. Highlights are achieved by taking small sections of the hair and lightening them. Highlights can be very subtle or extreme. Highlights will give a haircut texture and can help brighten a face and bring out a client’s eyes.
Also known as a Princeton. A very clean-cut style is named for its popularity among men attending the “Ivy League” universities (Princeton, Harvard, Yale, et. al). Generally, the hair is cut very short all over, gradually getting slightly longer in front. Enough hair is left to part and comb neatly. This haircut conforms to the shape of the head and the emphasis is on neatness.
A popular haircut that is performed entirely with shears. Hair is cut in uniform “layers” all over the head. The cut can be as long or short as desired and can be a very versatile cut.
The origin of the term “mullet” has been traced back to the film “Cool Hand Luke.” Apparently one of the guys calls people with long, shaggy hair “Mulletheads.” The style is popular among soccer players and country music singers. Generally, the hair is cut short on top and on the sides, with considerable length left in the back.
A longer version of the classic tapered haircut in which the hair is brushed back and secured with a liberal application of pomade. The pompadour was the signature haircut of Elvis and was quite popular by young “rebels” in the 1950s.
The little patch of hair that grows in front of the ears. Can be worn to any length with almost any hairstyle. The length of the sideburns can also enhance the face. Longer sideburns tend to give a wide face a slimming effect.
A long layer cut that is cut using a razor to give the haircut a deconstructed (shaggy) look. This is an easy-to-maintain style and requires only a little product and a good shake to look great.
Hair at the back of the neck is graduated to zero length, leaving an exposed natural hairline. Many barbers, stylists, and clients make the incorrect assumption that a tapered neckline is always very short. As you can see from the illustration at the left, a tapered hairline can work quite well on a longer style. This would be considered a “low taper.” The advantage to a taper is that, as the hair grows out, the neckline remains natural and blended. This will give the haircut a fresher look longer than a blocked nape.
Generally, hair is cut to achieve a smooth, uniform effect. Sometimes, texture (a spikey, disheveled look) is desirable. The texture is added to the hair by cutting the ends unevenly using a shear point technique or with a razor or thinning shears. Texture can also be added by the subtle use of highlights. Even the most traditional haircuts can be made more contemporary (if appropriate) by the use of texturizing.
Sometimes called a “Brooklyn Fade,” “Low Fade,” or “Blow Out,” this type of haircut is a very low bald fade. The hair is cut to the scalp from the temple and dips low in the back. The hair is then quickly but smoothly tapered (faded) into significant length on top.
This “hipster” haircut is characterized by the extremely tight (sometimes shaved) sides and back which are taken up to just past the round of the head. There is no blending between the sides and the top (which is often styled in a pompadour). This cut is similar to the bowl cut, only the sides and back are shaved higher.
A faded or tapered haircut in which the sides and back have maximum scalp exposure. The term “whitewall” comes from the extremely white skin which is exposed after the haircut, reminding one of the white sides of a whitewall tire.
Find A Great Barber In St Pete
Goodfellas Barber shop in St. Pete is the place to go if you’re looking for a top-notch barber and a men’s haircut in St Pete. You will find The Barbershop in a central location within Pinellas County on 4th Street. We can provide you with a state-certified barber in St Pete. Are you are looking for barber shops that serve beer and a talented barber to treat you to a haircut, or shave? Contact us today!